Management of Chronic Pain for Patients With Breast Cancer Essay

Management of Chronic Pain for Patients With Breast Cancer - Essay Example The International Association for the Study of Pain defines it as: "An unpleasant sensory and emotional experience associated with actual or potential tissue damage or described in terms of such damage." Subjectively it could denote any form of unpleasant sensation with varying degrees of intensity. Pain is distinguished based on two basic types identified as acute and chronic. Acute pain results from a disease process whereby there is inflammation or injury to tissues occurring rather suddenly after trauma or surgery and may be accompanied by anxiety or emotional distress. Usually certain medications serve to diminish the intensity of Acute Pain. Chronic Pain however, persists over a longer period than acute pain and is resistant to most medical treatments. Several factors may serve to heighten its perception and frequency thereby causing discomfort to patients in varying degrees. Pain follows a certain train of events before it is detected and proclaimed by a patient. Luckmann and Sorensen traced it to "the nerve receptors, named as nociceptors which differs from the complex receptors of vision and other senses". These nociceptors are simply free nerve endings in almost all types of tissues which react to change and require a high level of stimulation to elicit a response. However once their threshold is exceeded they communicate the presence of the painful stimulus. At times they become so over sensitized that long after the stimulus is removed, pain still persists. Once these nociceptors are stimulated, they discharge an impulse that travels in the form of an electrical activity to the spinal cord and on to the brain. The spinal cord is informed on the activity of the body through nerve fibers carrying somatosensory information. The spinothalamic tract then carries the painful information to the brain via the thalamus by passing through the somatosensory cortex which serves to localize and identify the quality of pain before it is diffused to the many areas of the brain including the reticular formation, medulla, hypothalamus and limbic structures. As a response, the brain sends to the receptors a complex response to the painful stimuli. It dictates the receptors to identify the degree, the character and intensity of the pain; its location and how to behave to reduce or avoid it in the future. "Pain can be inhibited if its pathways are blocked", as presented in the Gate-Control Theory of Melzack and Wall. The "gate" in their report is controlled by a dynamic function of cells that can facilitate or inhibit the transmission of pain signals. The fibers bringing pain information from the tissues are found in layers known as laminae. A certain Laminae II which is different from the rest of the layers and also called the Substantia Gelatinosa(SG) is proposed as the location of the "gate". This serves as the convergence point of all pain information, whether stimulus coming in from the tissues or identification from the brain. A spinal cord transmission cell also known as the t-cell either opens the gate thereby facilitating pain transmission or closing the gate. A variety of sources may close or open the gate but only the brain can manipulate the "gate" to inhibit or

Three negative impacts of Parental divorce on children in Contemporary Research Paper

Three negative impacts of Parental divorce on children in Contemporary China - Research Paper Example The number of separations and divorces is still less than the United States but the marked difference is becoming less day by day. And the impact it has on Chinese children is pretty bad. They feel inferior to everyone else all of a sudden and cannot help but think that they have a broken family even if their parents ended it at the best of terms1. The Government of China has certain rules that everyone has to follow and one of them is the famous one child policy. If the one child of the family loses the only family he has ever known, it crushes him completely. This is one of the greatest negative impacts that take place, which he has, no sibling to share the scenario with. Most parents fight but get back together because they have various children and find sense and compassion in one of them, enough to patch things up. This is not possibly here because all alone; the child faces the worst of the deals and often and understandably so thinks that no one can understand what he is going through. Even though divorce is not uncommon in China anymore, it is still somewhat not an acceptable thing in society. To escape from the prying eyes and the pinging gossiping sessions, more often than not the parent moves away to another country. Usually it is the parent with who the child remains, through a custody settlement. This also has a negative impact on the young one. Leaving behind everything they ever know, they become accustomed to the new world, often feeling incomplete and hopeless. The reverse effect can also take place. Sometimes no one moves anywhere and the child has to face a lot of discrimination amongst the peers and the society because it is still an unacceptable trait in a lot of areas of China. Chinese people are usually very family oriented and have a fixed set of ethics and values, even in these times where such things are rarely found. It is

Google and Yahoo Essay Example | Topics and Well Written Essays - 7000 words

Google and Yahoo - Essay Example Organizational structure, design and culture play an imperative role in organizational effectiveness and success. This is because they assist an organization to comprehend itself and enable the workers to work together to achieve all the tasks and achieve all the objectives of the company. These are aspects that an organization cannot neglect in its development. The concepts of organizational culture, structure and design have received considerable attention within organizational theory in the past decade. Researchers, consultants and mangers, have gravitated to the conception of culture, structure and design to encompass the special approach to life and creation of meanings which evolve within an organization. Different organizations have different organizational structures, designs and cultures. Yahoo incorporation is one of the renowned companies in the world for its internet services. It is an American company that offers search engine services, web portal, internet directory, ne ws, finance and advertising. Some of the services offered by Yahoo Company include â€Å"Yahoo Directory, Yahoo Mail, Yahoo Finance, Yahoo News, and Yahoo Answers† (Media Relations, 2005). According to Media Relations (2005), approximately seven hundred million people use its internet services every month. ... Yahoo incorporation faces stiff competition from Google Company. Google is an American company that offers internet services and products. Such products and services include cloud computing, software, search, and advertising technologies. Google was established by Brin Sergey and Page while studying in Stanford University in 1996 (Google, 2013). These two founders own about 17 percent of the stake of the company. The company offers internet software including electronic mail, social networking and office suite. The company has ventured into mobile phone software where it leads innovator of Android mobile phone operating system. The company has ventured a lot into the communications hardware by partnering with primary electronic producers across the world (Google, 2013). Google Company operates an estimate of one million servers across the world, with more than one billion search requests every day. According to CNBC (2007), Goggle is the most visited search engine and website across the world. Just like Yahoo, Google offers its search services in different languages. It is one of the best performing corporations in the world. Google Company also owns You Tube and Blogger sites. This company started as a research project. It was initially referred as â€Å"BackRub† where it only analyzed other websites to determine their relevance. It was later named Google, and started working under Stanford University’s website (Google, 2013). The company is headed by a CEO. The multifaceted contacts between employees and workers in Google are seen as determinants of behavior in the place of work (Eliud, 2012). It is one of the companies with a unique organizational culture. Part I: Structure and Design Organizational structure implies an

Biology Essay Example | Topics and Well Written Essays - 500 words - 9

Biology - Essay Example Each protein is formed in accordance with a set of instructions contained within the nucleic acid, which accounts for the cells genetic material. These set of instructions regulate which of the twenty amino acids are to be incorporated into the protein, and in what sequence. The final shape of the protein and its chemical properties is decided by the R groups of the amino acid subunits. There are four levels of protein structural organization: primary (1Â °), secondary (2Â °), tertiary (3Â °), and quaternary (4Â °). Primary structure is defined as the linear sequence of amino acids in a polypeptide chain. The secondary structure refers to certain spatial arrangement of the main peptide chain, examples of which are the alpha helix and the beta pleated sheet. Tertiary structure results from long-range contacts within the chain. The quaternary structure is the organization of protein subunits, or two or more independent polypeptide chains, as found in hemoglobin and certain enzymes. Proteins are broken down in the stomach into amino acids by enzymes known as proteases. These amino acids help build protein for the body organs, muscles, bones, blood, besides also acting as an important nutritional source of nitrogen. They also act as a storehouse of energy, containing around 4 kilocalories per gram. In addition to their function in growth and cell maintenance, proteins are also responsible for muscle contraction. Insulin, hormones and most digestive enzymes are all proteins. The antibodies in the immune system are well known proteins, and they are also the chief constituents of hemoglobin, which does the work of carrying oxygen to all parts of the body. The cell theory states that all organisms are made up of similar units of organization, called cells. This idea was conceived by Schleiden and Schwann in the year 1839 and has been one of the major milestones in the history of biology. The road

Business patents report Essay Example | Topics and Well Written Essays - 250 words

Business patents report - Essay Example Following suit, other companies in the software segment are beginning to analyze their innovative intellectual properties for opportunities to exploit their unique technology developments and thus gain market share. Seeking patent protection on this business’ new software will restrict market entry from other software companies looking for B2B information technology solutions market potential. The main issue with attaining a patent is the litigation risk of not performing an adequate patent clearance search to identify software in our market already holding patent protections. The recent course case involving Apple and Samsung has set a business precedent for the high financial costs of accidentally duplicating various icons or display features in the development process. However, this business can offset these risks by assigning a patent clearance team to conduct appropriate external research to ensure development does not infringe on intellectual property protections. Patent protectionism will provide for licensing in the event that the business is unable to secure high volume of market interest post-launch. It is more likely that this business will be able to attain venture capitalist interest in financial investment, which will offset development and patent clearance costs, by minimizing litigation risks or competitor replication of the

Christmas Carol Essay Example for Free

Christmas Carol Essay The light represents a sense of alertness to show that Scrooge has done great harm and hope. This quote also opens the sight to the audience of Scrooges past time and why he is the way he currently is. The Cratchits are an example of the impoverished people who, Dickens felt, were very honest. The poor people were never too worried about getting more than enough but just wanted something decent to live on. The clothes they whore were past down from parents or older siblings. The food was shared equally so that no one would be left too hungry, all these actions make the poor increase their love for each other. Dickens shows this when: There was nothing very cheerful in the climate( ) Yet there was an air of cheerfulness abroad This quote shows that even though the weather and atmosphere was very dull, the Cratchits still were happy for the sake of Christmas. This shows that Dickens is emphasizing that the poor had good characters, because they made the most of what they could and hardly complained whilst on the other hand the rich werent so graceful. Dickens clearly shows that the rich are greedy and do what will benefit them so they live in a crafty way to get more money. The rich do more and more to feel satisfied but they still want more which leaves them with corrupt lives. In this manner the rich never see the real wonder and beauty of life. This is shown by Dickens through the character of Scrooge when Scrooge has never been to Bob Cratchits house. Here he sees how the Cratchits, despite being very poor, can be happy at Christmas. Bob and Mrs. Cratchit struggle because their family is large: there are six children. Scrooge sees how frail Tiny Tim is and asks the Spirit if he will live. The ghost tells him that unless something changes in the future, the child will die. This makes Scrooge feel bad and some emotions in Scrooges feelings are shown. Later on in this stave the Ghost of Christmas Present takes Scrooge to Freds house. Fred is having a party and Scrooge is brought by the spirit to see and hear it to show him the benefit of a warm family life and that money could be used to share love and happiness. Scrooges nephew Fred says: his offences carry their own punishment. This quote shows that whoever does evil, then evil will come back to him, in this case Scrooge has no care for the poor and so he is punished by being lonely with no family or friends. It also shows how Fred does not have any ill feelings towards his uncle. This quote suggests that Dickens felt that the rich werent always happy and secure because of their possessions but needed respect for who they were, to be happy. Fred is a very generous rich man and Dickens shows that not every rich person was selfish and greedy but some were kind and caring. Dickens shows you could be rich of love and happiness with family and friends, even for the poor. Dickens explains this through the character of Fred when we are told: Scrooge is to be pitied, not despised. He is rich but his money does him no good This quote shows that the rich were not always seen as the mighty, glorious people in the Victorian times but some were seen as being very low. The second part of the quote clearly emphasizes that money couldnt buy everything. But in some circumstances money was a hindrance. Dickens also shows us that having all the money and wealth in the world cannot make you as joyous as being generous and kind. Dickens emphasizes this in his novel through the character Mr. Fezzywig, who is a very generous rich man, who had great love and joy. At this point in the novel, Scrooge is more emotional about how he has treated other people. He finds out that the Cratchits are happier than he had assumed but are suffering severely especially Tiny Tim. He finds out the truth of how his nephew really feels about him. However he knows that he has one more journey to go to and that is the future. The Ghost of Christmas future brings a sense of fear into the scenes, because of the way he only points but doesnt speak and his head is covered with a hood. The phantom slowly, gravely, silently approached This shows that Dickens was very serious about the issues of poverty and that he wanted everyone to know how horrific it was to be so greedy and not give anything to the poor. The quote shows us that something dreadful is to come. Similarly Dickens criticizes the rich who do not give to the poor by saying that they will have no one to care for them when they are feeble. Dickens shows this when the old woman says: I thought hed never die. This quote shows that Dickens is emphasizing how desperate people will be to get rid of such selfish, tight fisted people who have no care for others. The quote has a very strong message because it illustrates how worthless money can make a person. Dickens shows this worthlessness of money if not used properly can make a rich person worthless. This is shown when: Its likely to be a very cheap funeral This quote shows that people did not care about this person who has died. Dickens message here is that no matter how rich you are, you will not be worth a penny if you are careless and greedy. Scrooge gets scared and worried of what he sees. Scrooge shows lots of emotion, this is shown with: In his agony he caught the spectral hand. This quote shows that Scrooge has become very feeble of his feelings because he has finally realized how dreadful of a person he has been. Dickens uses agony to show the amount of pain and misery a greedy persons death would be. In conclusion, Scrooge learned that money isnt everything and that being generous and respectful to others is the most important thing. Scrooge also learns that family and friends come before money and business. In the following century society had many improvements such as benefits for the elderly and disabled. Most of these improvements were made into society after World War 2. This was mainly due to that in the world war, both the poor and rich fought together as one nation. Therefore the rich got to know the poor better and money was shared to provide for all the people so they could help in the war. Food rations were one of these schemes, so the world wars had a huge impact on how society was treated. In the modern society we live in there are many changes due to everybody contributing such as taxes. However in the Victorian times society was very closed and the message Dickens was trying to get over was that everyone should help each other whether poor or rich. There are many modern day Scrooges we can refer to even though its been over a century since Dickens era. However the Scrooges we can refer to in this century have been the more clever, sneaky ones. An example of this is when DNA was discovered. The men who were seen as discoverers were Watson and Crick. However the real people behind the scenes actually made this discovery but the credit and glory was all given to Watson and Crick. Unlike in Dickens times, the modern societys can get hold of money easily but nowadays it is more about pride and glory. Similarly of how poverty was present in Victorian England it still exists in the third world such as Africa but the Scrooges are known as the politicians however the poor are still the public.

Purpose of Ministry of Business, Innovation and Employment

Purpose of Ministry of Business, Innovation and Employment MINISTRY OF ECONOMIC DEVELOPMENT   Ã‚   The main aim of the MBIEs is the growth of the New Zealand for all. This growth is relates to the economy. For achieving a quality life and a good living standard an economy promoting sustainable growth is required. For all includes the people of New Zealand at present an also in future. MBIEs purpose is for New Zealand to benefit from: Maximum numbers of highly skilled people and innovative firms A greater dynamic and supportive business environment Sustainably higher value derived from natural environment more productive and prosperous sectors, regions and people A better environment that can better supports a well-functioning economy The work of MED is to regulating the NZs standards and conformance infrastructure. It works with the purpose of: Motivating the business person to do innovations in their products, encourages competition and productivity. Reduction in the compliance cost to the business Development in the technical infrastructure of business in order to meet the needs of consumers and local business. 5 specialist bodies works with the MED for the betterment of New Zealanders SNZ JAS-ANZ TSS IANZ MSL These organizations works with the collaboration with the MED in order to provide quality life to the residents of NZ through standards and conformance infrastructure liaison group: TSS : Trading standards service IANZ: International Accreditation NZ. MSL: Measurement standards laboratory of NZ. SNZ: Standard NZ JAS-ANZ: Joint Accreditation system of Australia and New Zealand There are fewer regulations related to trade of goods and services in New Zealand. The traders and manufacturers to ensure their product safety adopt self-regulations. All of this is backed by the consumer protection legislation. Consumer protection legislation The responsibility of standards and conformance infrastructure falls under this legislation Works to improve technical infrastructure to support the people of New Zealand, their businesses and trading activities of New Zealand. Promotes healthy competition and supports innovation and productivity constantly. Reduces the compliance cost in businesses. Looks after the five technical bodies of Standard and Conformance infrastructure and makes sure they are functioning properly and are being met by people. Five technical bodies of Standard and Conformance TSS : Trading standards service IANZ: International Accreditation NZ MSL: Measurement standards laboratory of NZ SNZ: Standard NZ JAS-ANZ: Joint Accreditation system of Australia and New Zealand Food Safety and HACCP Thus, food safety regulations are applicable on food sold in the domestic and local markets In Hazard Analysis Critical Control Point (HACCP) handlers of food have to analyze it, identify risks if any and put the systems to handle those risks. HACCP makes sure that food processors, wholesalers and retailers, restaurants and other food premises are involved in identifying and managing any areas or processes where food contamination or deterioration could occur. These regulations are applied by Ministry of Health on food which is sold by the seller in the local market. The aim of applying these regulations is to ensure that the food which is sold is free from any kind of contaminated material and fit for the human consumption. The Ministry of Agriculture and Forestry also keep a check on the exported products whether they are safe for consumption or not. In the domestic market, it is voluntary, but food processors and retailers with an independently audited HACCP system in place can apply to the Ministry of Health for exemption from regular food safety inspections. ELECTRICAL AND GAS SAFETY Electrical safety regulations protects the people from the electricity related harms and dangers The service also regulates the quality and measurement of gas and electricity and the quality of petrol and diesel This includes safely installation of electrical appliances and safety of electricity supply and generating systems This regulations deals with the safety requirements regarding the electrical and gas appliances This also includes the measurement of gas and electricity Electrical appliances are verified in order check whether they are safe to use or not MACHINERY, PRESSURE EQUIPMENT, CRANES AND PASSENGER ROPE-WAYS There is a organization that is Occupational Safety and Health(OSH) that helps to safe the human beings and workers from the machines and equipments Heavy machines like boilers, cutting machines should meet OHS standard before being used in NZ. OSH provides the standards that must used by the person before the appliance used in NZ. Before going to the market, the product must be tested and inspected. Thus, exporters need to check carefully whether there are any technical requirements their product must meet in each market and what is involved. MUTUAL RECOGNITION AGREEMENTS OR ARRANGEMENTS (MRAs) Mutual Recognition Agreements is a mutual agreement between the two countries. It is an international agreement. This is the agreement where two or more countries agree to recognize one anothers conformity assessments. MRAs enable New Zealands test and inspection reports, and product and quality certificates, to be accepted by other economies. MRAs are based on shared purpose and belief in the technical competence of each others systems and procedures. It is the responsibility of MED to maintain govt. level MRAs. For maintaining govt. level MRAs the govt. includes some sort of agreements. These are: TTMRA (Trans-Tasman Mutual Recognition agreement): Australia and NZ made the agreements which are done for the betterment of the both countries. It came into force on May 1 1998. According to this agreement the good which is sold in one country is legally able to sell in country without any difference. NZ/EU MRA (Agreement between NZ and European community for mutual recognition of conformity assessment): According to this agreement conformity regulations is done by the NZ/EU MRA (testing, inspection, and certification) of products traded between New Zealand and any of the fifteen members of the European Union to be undertaken in the exporting country, before the goods are shipped. Each country follows its own rules and regulations but they agree that one country can act on the behalf of other. CEP (Agreement between the NZ and Singapore on Closer Economic Partnership): According to this approach same international standards are followed at international and recognition of conformity assessment. To minimize the effect of technical barriers, to promote use the best practice internationally and support of NZ exporters and importers. For example, the parties have negotiated mutual recognition of conformity assessment in electrical and electronic equipment. APEC (Asia Pacific Economic Co-operation): MED officials represent the NZ on APEC which is Sub-Committee on standards and conformance which works out for the purpose of bringing harmonization in the mandatory technical requirement of trade between the economics in Asia Pacific region. Standards refer to the published documents that include specifications for processes, products and services that have been agreed upon. Standards cover areas of compatibility, quality, information, safety and performance. Standards are some sort of doings that are used as measure, norm or model in comparative analysis. It is a benchmark i.e. a product or a service should be of a particular quality or level. For example an electronic product is said to be meeting a standard when the minimum safety requirement is met. It makes our lives easy as it helps in keeping our house, building, electronics etc. safe. TYPES OF STANDARDS STANDARDS MANDATORY/VOLUNTARY MANDATORY: Mandatory standards are documented in laws or regulations that are stated through Acts or legislations, Mandatory standards are put in place by governments in order to order to protect the national interest. If any person does not abide these standards while performing any act, its punishable offence. These protect the consumer from being exploited because these act as safety standards; the demand for mandatory standards has been increased. It is illegal to sell products or services without meeting mandatory standards. VOLUNTARY: Voluntary standards are those standards that are not stated under law; these are formed by company according to their wish. For example ISO is a voluntary standard. Voluntary standards are set by customers or these are encouraged by industry groups. If someone wants more sales then they have to follow the voluntary standards because they ensure product is safe. The ministry has produced document called self regulation and codes of product to assist the industry in preparing appropriate codes to initiate their voluntary moves to achieve mutually agreed purpose in the eye of society, industry. The purpose of creating voluntary standards is to maintain image in the minds of consumers that the product is safe for consumption and doesnt provide any harm to human lives. STANDARDS NEW ZEALAND (SNZ) SNZ is that business unit that has a specialization in managing the development of standards and standards based solutions. Under the guidance of trading department of standard council, it was formed. The rules and regulations are mentioned in the standard act 1988 and governed by standard council. The Council has statutory responsibility for overseeing the development and adoption of standards and standards related products. SNZ does not receive direct government funding but receives revenue from contracts with industry and government for the adoption, development and support of standards and from the sales of standards publications. NEW ZEALAND ROLE New Zealand Standards, specified for New Zealand conditions. It is anoperating arm of standard council. It works on the behalf of consumers, industry and govt. It provides codes of practice or Industry Technical Agreements; these are quicker and less expensive to develop than a full standard. It conducts seminars to inform and train people on the content of specific standards and to publicize new standards. The main objective of the SNZ is to check whether the product, process and any other thing meet the quality standards or not. The product, process that meets the quality standards is only allowed for sale. NZ authorities check whether the product is safe, secure, and efficient for consumption purposes. NZ has 5 crown standards and conformance bodies among them one of the crown bodies is The Standards Council which has a SNZ as its operating arm. It is governed by the standard act 1988. SNZS INTERNATIONAL ROLE SNZ represents New Zealand in the International Organization for Standardization (ISO) and the International Electro-technical Commission (IEC) and facilitates New Zealand representation on relevant ISO and IEC technical bodies and standards committees. This enables New Zealand to have participation in the shaping of international standards and developments that help in reducing barriers to trade in New Zealands major export sectors and markets. SNZ is contracted by the Ministry of Foreign Affairs and Trade to act as New Zealands Enquiry Point for the WTO Agreement on Technical Barriers to Trade (TBT).   The Enquiry Point notifies the WTO of any New Zealand regulations that may impact on trade.   It also responds to enquiries from overseas on any regulations or requirements that must be met before specific products can be imported into New Zealand. SNZ is a founding member of the Pacific Area Standards Congress (PASC) and participates in PASC activities.   SNZ also works closely with government in standards and conformance activities within APEC and on standards issues in negotiations between Australia/New Zealand (CER) and trade groups in Southeast Asia and South America. SNZ also provides advice to the government on standards issues within international organizations such as the WTO and the OECD. SNZ assists in meeting the governments development assistance objectives by providing consultancy support, training and capacity building opportunities for standards bodies in developing countries All goods that are Exported/Imported shall pass through a barrier before they can be legally allowed to be sold in the market. MEASUREMENT The Measurement Act 1987 defines the regulations regarding the measurement and safety service. Measurement is the assignment of a number to a characteristic of an object or event, which can be compared with other objects or events. Measurement ensures that units of measurement are consistent with the international system of units. Units of measurement which are used by exporter, trader and supplier must comply with the international system of units. MSL(measurement standards laboratory) MEASUREMENT TSS(trading standards service MEASUREMENT STANDARDS LABORATORY (MSL) MSL is the National Metrology Institute of New Zealand that ensures consistency of NZ units of measurement with International unit system that is SI.MSL makes sure New Zealand is delivering measurements that are reliable and correct. It provides national measurement standards that are traceable to International System of Units.New Zealand is a signatory of Metric Treaty and also to the Mutual Recognition of National Measurement Standards and of Calibration and Measurement Certificates issued by National Metrology Institutes. MSL participates in all metrology activities conducted in the region of Asia- Pacific and is one of the active members. NEW ZEALAND ROLE MSL measurement capability underpins our whole technical infrastructure. Its key functions are: To support the standards of measurement relevant to New Zealand To ensure that users, both national and international, have confidence in New Zealands standards of measurement. To ensure that all measurements in New Zealand can be traceable to the International System of Units. MSL provides appropriate national measurement standards for the SI units of importance to New Zealand. New standards must be introduced and accessible standards extended in range and accuracy. Self-assurance in measurement is important for enforcement of local and central government regulations and codes, and for well-being in society. MSL is continually improving the measurement standards. In scientists it also monitored development in their professional areas so they can report on and respond to the changes. One of the main roles of MSL is to provide calibration also known as verification reports, which are traceable to SI and to National Standards of New Zealand. Calibration is provided in the areas like: Biological and chemical Length and dimensional Photometry and radiometry Mass and pressure Temperature and humidity Time and frequency It provides specialist measurement services Provides expert consultancy which advices on the measurements that are difficult. It includes expertise in technical areas such as- Laser safety Lighting Speed measurement Temperature required Ultra-Violent Hazards INTERNATIONAL ROLE SI or metric units of measurement are supported and developed under inter-governmental Metric Treaty of 1875 and NZ has adopted the same and became signatory to Metric treaty in the year 1991. MSL along with 37 other countries In October 1999 signed an agreement for Mutual Recognition of National Measurement Standards and of Calibration and Measurement Certificates issued by National Metrology Institutes. MRA states that national measurement institutes of signatory countries carry international measurement comparisons on regular basis. Regular comparison shows that measurements followed by different countries are same. The review is done regularly for purpose of ensuring that measurements from the different countries are same. TRADING STANDARD SERVICE (TSS) TSS helps by providing the security or sureness that the exchange of goods takes place on accurate measure, weight, and recognition basis. TSS provides constant advice to the government about measurements systems and legal operations. It provides advice to government on the NZ legal measurement system and its operation. The Weight and Measures Act 1987 is enforced by and under TSS. The system of standards and conformance applicable to trade is stated under the Weight and Measurement act. TSS is involved in testing of new weights and measuring instruments and approves them. NEW ZEALAND ROLE OPERATIONS: Provide advice to Government related to trade measurement issues Ensure compliance with the provisions of the Weights and Measures Act 1987 By using traceable standards of weight and measure TSS protects the integrity of the NZ trade measurement system Protect the integrity of the New Zealand trade measurement system Promote assurance on the accuracy of weighing and measuring equipment TSS prevents fraud by maintaining a type approval laboratory where new types of weighing and measuring instruments are checked against international measurement standards. INTERNATIONAL ROLE Asia Pacific Legal Metrology Forum: The purpose of Asia Pacific Legal Metrology Forum is to encourage honesty and harmony lawful metrology actions and services within the Asia-Pacific region and to build joint confidence in trade measurement. NZ is a active member of the APLMF. It is established under the APEC (Asia Pacific Economic Cooperation) as a special regional body. Trade Measurement Advisory Committee: The trade measurement authorities of NZ in joint collaboration authorities, states and territories of Australia developed this committee. These authorities comprises of this committee. This committee solves the disputes arising within Australia and between Australia and New Zealand and provides advices. The focuses on trade main issues within Australia and between Australia and New Zealand and provides guidelines opinion on trade depth issues to Australian State and Federal Governments and the New Zealand Government. AFTA and Australia/New Zealand CER: New Zealand and Australia also work alongside partner in the ASEAN Free Trade Area (AFTA) on trade measurement issues. International Organization of legal Metrology: This organization was developed for the purpose of bringing international harmonization in the practical and theoretical aspects of measurement which is known as Metrology. It was established in 1955. NZ is one of the corresponding members of this organization as it consists of 57 countries and further 48 corresponding members. CONFORMANCE Conformance is undertaken by technical experts. Decisions are based on the results of measurements, tests, inspections or audits. Conformity assessment bodies then issue reports and certificates of compliance. This provides Accreditation or formal recognition that a body or person is competent to carry out specific tasks. There are three main types of conformity assessment: testing, inspecting and certifying. Conformance can be done through IANZ or JAS-ANZ. CONFORMANCE JAS AND ANZ INTERNATIONAL ACCREDATION NZ (IANZ) It is the national accreditation body which was established in 1972. It is a member of ILAC (international laboratory accreditation cooperation) and APLAC (Asia Pacific laboratory accreditation cooperation). It is involved in recognizing and assessing technical competencies It is a part of Accreditation councilandit is a crown entity. Govt. and others sectors voluntary use accreditation as a reliable method of competence. NEW ZEALAND ROLE It works with the government agencies to provide trade opportunities to NZ exporters to do trade at international level. It ensures that its government, consumers public have confidence in quality competence in NZs testing. IANZ is the operating arm of the Testing Laboratory Registration Council, a statutory body established by Act of Parliament in 1972. Over 200 technical experts who act as technical assessors for peer reviews of laboratories or inspection bodies in their specialist field gives proof to IANZ and IANZ relies on them. IANZ itself do evaluations by counterpart accreditation authorities from Europe, North America and the Asia Pacific region. This ensures that its competence and procedures remain consistent with international practice. IANZ participates in similar peer evaluations of its overseas counterparts. IANZ Operations Radiology service accreditation (ISO/IEC 17025 adapted) Pharmacy accreditation (ISO/IEC 17025 adapted) Testing and calibration laboratory accreditation (ISO/IEC 17025) Inspection body accreditation (ISO/IEC 17020) Proficiency testing programme accreditation (ISO/IEC Guide 43) Registration of OECD GLP Compliant Laboratories Designating Authority for approval of laboratories and inspection bodies for CE marking (see page 10)Assessment of Ministry of Health food safety system (HACCP) auditing bodies Assessment of MAF meat industry laboratories Development of accreditation programmes and technical criteria Technical information and advice Input to development of international standards relating to testing, inspection and accreditation Training courses in a range of technical areas, including laboratory quality management, measurement, testing and auditing skills.   Specific courses cover accreditation requirements for medical testing, radiology and inspection services Advisory service for developing country accreditation authorities INTERNATIONAL ROLE Accreditation authorities are signatories to the ILAC or APLAC Mutual Recognition Arrangements (MRA) in over 65 countries, which recognizes reports from IANZ, accredited laboratories and inspection bodies as they meet the required international standards. IANZ comes in voluntary sector i.e. it is not mandatory under law. It is involved in providing proper guidance to the government on technical barriers and on conformance related issues. JOINT ACCREDITATION SYTEM OF AUSTRALIA AND NEW ZEALAND (JAS-ANZ) Australia and New Zealand has Joint Accreditation System helps markets for making their work more efficient by providing internationally recognized accreditation services that create economic benefit. By using the criteria of conditional model on international standards and guidelines JAS-ANZ provides accreditation programmers for regulator and industry specific schemes. Increased trade and greater competition from imported products has brought into focus the need for quality in products, processes and services. It creates economic benefits. It helps in the establishment of confidence among the users of Australia and NZ that goods used by consumers are met with the certain standards. It provides advises to govt. regarding the conformance issues and also manages and administers efficient management schemes. NEW ZEALAND ROLE Joint accreditation system helps in the establishment of confidence among the users of Australia and NZ that goods used by consumers are met with the certain standards. It helps in supporting the trade by obtaining and maintaining oversea acceptance of product certificates and management systems certificates issued in New Zealand and Australia. It makes the links with relevant bodies in the areas of conformity assessment services and recognition of standards in relation to goods and services. It oobtains mutual recognition and acceptance of certificates of conformity with relevant bodies in other countries. JAS-ANZ also provides advice to the government on conformance issues and participates in standards and conformance aspects of trade negotiations. The following activities are presently under the accredited programmes. Accreditation of Certifiers of Management Systems Certification of Quality Management Systems (ISO 9000 and QS-9000 for the automotive industry) Certification of Environmental management systems (ISO 14001) Certification of Food Safety Systems based on Hazard Analysis Critical Control Point (HACCP) Certification of HACCP Management systems Certification of Occupational Health and Safety Management Systems (OHS AS/NZS 4801) Certification of Information Security Management Systems (ISMS -   AS/NZS 4444) INTERNATIONAL ROLE The purpose of the JAS-ANZ is to develop mutual understandings with the international bodies so that accreditation certificates issued by will be international level and to be a forum for the exchange of information and ideas of common interest based on the relevant ISO/IEC accreditation and certification Guides. It is also a founding member of International Auditor and Training certification association which helps in developing mutual recognition scheme for ISO 9000 auditors and auditor training courses. TESTING Testing is the process that is being used to determine the characteristics of an item or material. The standard test methods are used to carry out tests in laboratories. For the scope of Accreditation all these tests are carried out.   The test reports may only carry the accreditation logo if the laboratory is accredited for specific tests. Testing is conducted to determine items or products characteristics. It is conducted in labs and reports provided are related to the sample testing. There are some Standard test method is used for doing tests that states environment, equipment and procedures to conduct a reliable test. Thus labs that are accredited for those tests can conduct tests and 500 of such labs are there in NZ. CALIBRATION Calibration is the process of ensuring that measuring instruments are giving accurate results. The Measuring instruments are calibrated to ensure that any measurements performed with the calibrated instruments will be traceable back to the national measurement standard. The wide range of measuring instruments such as speed cameras, analytical balances, measuring tapes, pressure gauges and electrical power meters are calibrated in calibration laboratories. Calibration reports may only carry the accreditation logo if the laboratory is accredited for those calibrations. INSPECTION Inspection is done in order to check that whether safety and technical requirements are being met. It is done for the purpose of ensuring that all safety aspects are checked. The specialist inspectors role is to examine technical aspects of things such as pipelines, crane designs, boilers, buildings, machinery, quarantine services or food premises. The international standard for professional inspection bodies (ISO/IEC 17020) covers designs, products, services, processes and plant. ISO/IEC 17020 (international standard for professional inspection bodies) covers all the products, designs, services and processes. Specialist inspectors examine the technical aspects of such things as pipelines, crane designs, boilers, buildings, machinery, quarantine services or food premises. International standard inspection methods are used in certain inspections for ensuring all safety aspects being checked. Inspection includes on-site observation in a detailed way and also thorough check of records, procedures and reports. CERTIFICATION According to the specific international standards, the certification bodies are accredited which is also related to the type of certification. The range of standards a certification body is accredited to audit against is specified in its Scope of Accreditation. Certification includes various categories. These bodies are accredited to specific international standards, depending on the type of certification they are competent to undertake. Personnel certification Product certification Certification of environmental management system (ISO 14001) Certification of quality management system REFERENCES          http://www.ianz.govt.nz/new-article-goes-here/ http://www.manufacturingnz.org.nz/re